How Much Does an Asphalt Shingle Roof Replacement Cost in Miami-Dade County?
Roofing
May 22,2026
Replacing an asphalt shingle roof in Miami-Dade County costs between $8,500 and $24,000 for most homes. Materials and labor split roughly equally, and Miami-Dade’s building codes push both costs higher than the national average.
What Do Materials Cost?
Materials make up roughly 40–50% of your total. Miami-Dade County requires every shingle to carry a Notice of Acceptance (NOA). This is a county-specific wind-resistance certification, and not every product on the market qualifies.
What is an NOA? A Notice of Acceptance is Miami-Dade County’s wind-resistance certification for roofing materials. If a shingle doesn’t have one, it can’t legally be installed on your roof here.
Here’s what to expect per roofing square (100 sq ft):
- Architectural shingles: $90–$160, depending on grade
- Underlayment: $20–$40 (Miami-Dade code requires enhanced underlayment)
- Decking repairs: $2–$4 per sq ft for damaged boards
- Flashing and accessories: $300–$700 total
- Disposal and haul-off: $300–$600
FoxHaven installs Owens Corning architectural shingles, which run $110–$140 per square in this market.
What Does Labor Cost?
Labor runs $150–$250 per roofing square. On a 1,500 sq ft roof, that’s roughly $2,250–$3,750. South Florida rates are higher than the national average because of licensing requirements, heat conditions, and Miami-Dade code compliance on every installation.
How Much Will My Home Cost?
| Home Size | Roof Area | Low (basic shingle, simple pitch) | Mid (dimensional shingle, moderate complexity) | High (impact-resistant, steep pitch, or complex roof) |
| 1,000–1,200 sq ft | 12–15 squares | $8,500 | $11,500 | $15,000 |
| 1,500–2,000 sq ft | 18–24 squares | $11,000 | $15,500 | $19,500 |
| 2,500–3,000 sq ft | 28–36 squares | $16,000 | $20,000 | $24,000+ |
Why Does Miami-Dade Cost More?
Miami-Dade sits in a High-Velocity Hurricane Zone (HVHZ). That designation carries requirements that apply nowhere else in Florida as strictly.
NOA-approved materials are required: Products must be wind-tested and certified for Miami-Dade use. Many standard shingles sold in other states don’t qualify here.
Enhanced underlayment is mandatory: Florida’s building code requires a secondary water barrier on most slopes in HVHZ. That adds material and labor cost to every job.
Permitting and inspections add time and cost: Miami-Dade inspections are thorough. A licensed contractor handles all of this, but it factors into your total.
Worth knowing: Miami-Dade’s HVHZ requirements exist because of real storm history. A roof built to these standards costs more upfront but is significantly less likely to fail during a hurricane.
Ready to Get an Accurate Number?
FoxHaven backs every replacement with the 30/30 Promise: an estimate in 30 seconds or less, and installation completed within 30 days of signing your contract. Financing is also available through Enhancify for qualifying homeowners, with a 60-second application and funds available within 1–5 business days.
Request a free inspection at foxhavenroof.com or call (772) 249-4954. FoxHaven’s crew inspects the roof in person and delivers a full cost breakdown with no hidden fees.
